alands
2008-07-16 16:10:11 UTC
I have one full bridge strain gauge assembly (type III) attached to a SCC-SG04, which is socketed into a SC-2345, that is in turn hooked up to a PCI-6221. The bridge is wired up according to the specification on page 17 of the document titled "USER GUIDESCC-SG Series Strain Gage Modules". I believe the original name for the file is 371073b.pdf, or something close to that.The problem manifests when I set up a task in MAX - I get flat line output at a value of about 68m, whatever 'm' stands for. But that is a separate issue.Similar configuration efforts using a SCC-SG02, on the same input sockets(s) provide an appropriate signal.What am I missing?Thanks,Alan