chasan_2k
2008-06-05 07:10:10 UTC
Dear All,
i get the error-200284 in the attached AC Test loop vi
the objective of this vi is acquire and control the pressure(top loop) and once the preesure is stabilised switch on the valve and measure the coil current(in the second loop)
the switching is done by a external powers supply and for synchronisation of switching and current read an external trigger from power supply is used(second loop)
i get error in first loop only that too,it happens occasionally (probability of 1/40)
i have gone through all the knowledge base and forum articles and tried those but still getting thesame error
pls suggest me by seeing the vi,whether i should change anything in the code
Note:may be the chroma vi wil not open in the main vi (since you may not have the driver)so you can leave it and see the code and let me know a suggetion
Thanks in advance
Chandru
AC_test loop.vi:
http://forums.ni.com/attachments/ni/250/40567/1/AC_test loop.vi
i get the error-200284 in the attached AC Test loop vi
the objective of this vi is acquire and control the pressure(top loop) and once the preesure is stabilised switch on the valve and measure the coil current(in the second loop)
the switching is done by a external powers supply and for synchronisation of switching and current read an external trigger from power supply is used(second loop)
i get error in first loop only that too,it happens occasionally (probability of 1/40)
i have gone through all the knowledge base and forum articles and tried those but still getting thesame error
pls suggest me by seeing the vi,whether i should change anything in the code
Note:may be the chroma vi wil not open in the main vi (since you may not have the driver)so you can leave it and see the code and let me know a suggetion
Thanks in advance
Chandru
AC_test loop.vi:
http://forums.ni.com/attachments/ni/250/40567/1/AC_test loop.vi